Titanium alloy seamless pipe
Outer diameter：Ф 15 Ф 235mm
Wall thickness：1.5-20mm
Inner and outer diameter tolerance：≤士0.05mm
Wall Thickness Tolerance：≤士0.05mm
Titanium alloy seamless pipe is a kind of titanium tube with hollow cross section and no seams around.
Titanium alloy has excellent corrosion resistance, low density, good fatigue strength and crack expansion resistance, and has a wide range of applications in aviation, aerospace, automotive, shipbuilding, energy and other industries. Titanium's excellent corrosion resistance and good specific strength, so that the titanium tube is thinner than other traditional metal materials pipe fittings made of products, better heat transfer.
Seamless titanium alloy tubing, with its unique physical and chemical properties, has become an indispensable high-performance tubing in modern industry. In many high-temperature, high-pressure, corrosive environments, Titanium alloy seamless pipes have shown excellent performance, becoming the preferred tubing material.
Product Parameters
| Outer diameter | Ф 15 Ф 235mm | Wall thickness | 1.5-20mm |
| Inner and outer diameter tolerance | ≤士0.05mm | Wall Thickness Tolerance | ≤士0.05mm |
| concentricity | ≤0.05mm | straightness | <0.30mm/m |
| The internal and external surfaces are stainless steel bright, no pitting, scratches, warped skin and other appearance defects | |||
Characteristics
Characteristics Titanium alloy seamless pipe has the following advantages compared with other metal materials.
① than the strength (tensile strength/density) high (see chart), tensile strength of up to 100 ~ 140kgf/mm2, while the density is only 60% of steel.
② good strength at medium temperature, the use of temperature than the aluminum alloy a few hundred degrees higher, in the middle of the temperature can still maintain the required strength, can be in the temperature of 450 ~ 500 ℃ long-term work.
③ good corrosion resistance, in the atmosphere, titanium surface immediately form a uniform dense oxide film, the ability to resist a variety of media erosion. Usually titanium has good corrosion resistance in oxidizing and neutral media, and the corrosion resistance in seawater, wet chlorine and chloride solution is more excellent. But in reducing media, such as hydrochloric acid and other solutions, titanium's corrosion resistance is poor.
④ good low-temperature performance, the gap element is very low titanium alloy, such as TA7, in -253 ℃ can maintain a certain degree of plasticity.
⑤ Low modulus of elasticity, small thermal conductivity, no ferromagnetism.
Uses：
1. Precision tubes for automobile manufacturing, precision tubes for automobile parts, precision tubes for precision equipment, precision tubes for boiler equipment.
2. Precision tubes for motor shells, motor shells, DC motor center barrels.
3. Industrial processing: precision tubes for machinery manufacturing, precision tubes for machine tool processing, precision tubes for bearing bushings, processing machine parts, etc.: precision tubes for automobile manufacturing, precision tubes for automobile parts, precision tubes for precision equipment, precision tubes for boiler equipment.
4.High-pressure oil tubes, hydraulic cylinders, pneumatic cylinders.
5.Others: Electrical gas transportation, water power generation fluid piping, Titanium alloy seamless pipe etc.
In Conclusion
They has a wide range of specifications, which need to be selected according to specific requirements, including diameter, wall thickness, length, material and other parameters. When choosing Titanium alloy seamless pipe materials, you need to consider the differences in their properties, such as tensile strength, yield strength, elongation and so on. We hope you choose the right product for your needs. Contact us if you have any needs!
