Titanium Alloy UNS R56400
Send InquiryDescription
Titanium Alloy Grade 5 is the most regularly used alloy and it is an alpha + beta alloy. Grade 5 alloy accounts for 50% of total titanium usage the world over. It has a chemical composition of 6% aluminum, 4% vanadium, 0.25% (maximum) iron, 0.2% (maximum) oxygen, and the remainder titanium. Generally, Ti-6Al-4V is used in applications up to 400 degrees Celsius. It has a density of roughly 4420 kg/m3. It is significantly stronger than commercially pure titanium (grades 1-4) due to its possibility to be heat treated. This grade is an excellent combination of strength, corrosion resistance, weld, and fabricability.
UNS R56400 Density:
| Physical Properties | Metric |
| Density | 4.43 g/cc |
ASTM Grade 5 titanium Mechanical Properties:
| Mechanical Properties | Metric |
| Hardness, Rockwell C | 35 |
| Tensile Strength, Ultimate | 895 MPa |
| Tensile Strength, Yield @Strain 0.200 % | 828 MPa |
| Elongation at Break | 10% |
Ti6Al4V Chemical Composition:
| Elements Properties | Metric |
| Aluminum, Al | <= 6.5 % |
| Carbon, C | <= 0.080 % |
| Hydrogen, H | <= 0.015 % |
| Iron, Fe | <= 0.30 % |
| Nitrogen, N | <= 0.050 % |
| Oxygen, O | <= 0.20 % |
| Titanium, Ti | 90% |
| Vanadium, V | 4.00% |
Ti64 Biocompatibility:
Excellent, especially when direct contact with tissue or bone is required. Ti-6Al-4V's poor shear strength makes it undesirable for bone screws or plates. It also has poor surface wear properties and tends to seize when in sliding contact with itself and other metals. Surface treatments such as nitriding and oxidizing can improve surface wear properties.
Ti6Al4V Specifications:
Sheet/plate: ASTM B265 Gr5
Bar/rod: ASTM B348 Gr5
Castings: ASTM B367 Gr5
Forgings: ASTM B381 Gr5
Implant Grade: ASTM F136 Gr5
Nuts: ASTM F467 Gr5
Bolts: ASTM F468 Gr5
Ti-6-4 Applications:
Blades, discs, rings, airframes, fasteners, components. Vessels, cases, hubs, forgings. Biomedical implants. Aircraft turbines, Engine components, Aircraft structural components, Aerospace fasteners, High-performance automatic parts, and Marine applications.
| Packing & Shipping |
1. Accept the request/customized packing | |
2. Normally, goods will packed in poly bags, drawstring bags, carrying bags, and cartons | |
3. For the sample, we will use TNT, Fedex, UPS, DHL, etc to ship it, | |
4. For bulk, it depends on the qty, by air, by train or by sea are all available. |
