Gr2 titanium plate

Gr2 titanium plate is a high-grade and high-quality titanium alloy material with excellent characteristics such as lightness, corrosion resistance, high strength, high-temperature resistance, good formability, and weldability. Gr2 titanium plate is the most common type of titanium product and is widely used in aerospace, chemical industry, marine engineering, medical equipment, electronic equipment, automobile manufacturing, and other fields.

Gr2 titanium plates are lightweight, about 40% lighter than steel of the same volume, and have high strength and excellent corrosion resistance, allowing them to be used in extreme environments. It also has good mechanical properties and good formability. Through rolling, stretching, and other processing processes, titanium sheets of various shapes can be prepared, such as pipes, plates, bars, wires, rings, etc.

Gr2 titanium plate has good high-temperature resistance and can be used at temperatures up to 350°C. In addition, its electrical conductivity is high, one-third that of copper, and can be used as an electrode in electroplating, electrolysis, and other fields. Gr2 titanium plate also has good oxidation resistance, heat resistance, corrosion resistance, and good compatibility with living organisms. It is an ideal material for making medical devices such as artificial joints, dental implants, and blood vessel substitutes.

The surface treatment of the Gr2 titanium plate is also very convenient. Surface sandblasting, anodizing, and other methods can be used to increase the surface hardness and corrosion resistance of the material. At the same time, titanium plates have relatively strong plastic deformation ability, good weldability and processability, are suitable for precision manufacturing, and can meet the personalized needs of customers.

Titanium plate production specifications:

T 0.5-1.0mm*1000mm * 2000-4000mm;

T 1.0-5.0mm* 1000-1500mm * 2000-3500mm;

T 5.0- 30mm *1000-2500mm * 3000-6000mm;

T 30-80mm * 1000mm *2000mm;

Titanium plate implementation standards

National standards: GB/3621-2007, GB/T13810-2007;

American standards: ASTM B265, ASTM F136, ASTM F67, AMS4928;

Manufacturing process

Hot Forging: A forging process performed above the recrystallization temperature of the metal.

Hot rolling: A rolling process performed above the recrystallization temperature.

Cold rolling: a rolling process in which the plastic deformation temperature is lower than the recovery temperature.

Annealing: slowly heating the metal to a certain temperature, maintaining it for a sufficient time, and then cooling it at an appropriate speed (usually slowly

Cooling, sometimes controlled cooling) is a metal heat treatment process.

Pickling: Immerse the workpiece in an aqueous solution such as sulfuric acid to remove oxide and other films on the metal surface. It is the pre-treatment or intermediate treatment for electroplating, enamel, rolling, and other processes.